Rechercher
Filters
Image sur 2.Front upright pivot system
  • Bag 2.0 Parts for steering knuckles.

  • 2 x  U2012 front upright pivot system L/R
  • 2 x  U2013 Steering lever L/R
  • 4 x  U2017 System nut
  • 4 x  U2016 Pivot ball steel
  • 4 x  U2015 Brass insert pivot system outside
  • 4 x  U2014 Brass insert pivot system inside
  • 2 x  61804 2RS wheel bearing big
  • 2 x  61901 2RS wheel bearing small

 

  • Bag 2.1 Fasteners for steering knuckles.

 

  • 1 x Thread locking material orange
  • 4 x M4 x 12 mm CK
  • 4 x M4 x 5 mm screw
  • 4 x M5 x 30 mm CK
  • 4 x passtift 3 x 6 mm

 

  • Assembly bag 2.0 en 2.1

  1. Take the 4 Brass insert pivot system outside U2015 and put them in the steering knuckles, please note that the recess is in the dowel .
  2. Take front upright pivot system L/R U2012 and put Thread locking material orange in the holes near the screw-thread. 
    On the other side off the steering knuckles screw the m4 x 5 mm screws.
  3. Take the 4 Pivot ball steel U2016and put them in the steering knuckles.
  4. Take M5 x 30 mm CK bolts and fasten the steering knuckles on the wishbones.
  5. Now place the brass insert pivot system outside U2015 and screw the system nut U2017 in the spindle until the knuckle is free from play but stil moves smoothly. (Pay attention there is no dirt in the fine thread. Use a little oil the first time)
  6. Take the front upright pivot system L/R and the Steering lever L/R. Mount them with M4 x 12 mm CK. On the other side of the steering knuckle screw the adjusting bolts M4 x 5 mm
  • Bag 2.0 Parts for steering knuckles.

  • 2 x  U2012 front upright pivot system L/R
  • 2 x  U2013 Steering lever L/R
  • 4 x  U2017 System nut
  • 4 x  U2016 Pivot ball steel
  • 4 x  U2015 Brass insert pivot system outside
  • 4 x  U2014 Brass insert pivot system inside
  • 2 x  61804 2RS wheel bearing big
  • 2 x  61901 2RS wheel bearing small

 

  • Bag 2.1 Fasteners for steering knuckles.

 

  • 1 x Thread locking material orange
  • 4 x M4 x 12 mm CK
  • 4 x M4 x 5 mm screw
  • 4 x M5 x 30 mm CK
  • 4 x passtift 3 x 6 mm

 

  • Assembly bag 2.0 en 2.1

  1. Take the 4 Brass insert pivot system outside U2015 and put them in the steering knuckles, please note that the recess is in the dowel .
  2. Take front upright pivot system L/R U2012 and put Thread locking material orange in the holes near the screw-thread. 
    On the other side off the steering knuckles screw the m4 x 5 mm screws.
  3. Take the 4 Pivot ball steel U2016and put them in the steering knuckles.
  4. Take M5 x 30 mm CK bolts and fasten the steering knuckles on the wishbones.
  5. Now place the brass insert pivot system outside U2015 and screw the system nut U2017 in the spindle until the knuckle is free from play but stil moves smoothly. (Pay attention there is no dirt in the fine thread. Use a little oil the first time)
  6. Take the front upright pivot system L/R and the Steering lever L/R. Mount them with M4 x 12 mm CK. On the other side of the steering knuckle screw the adjusting bolts M4 x 5 mm
Entrez votre propre avis
  • Mauvais
  • Excellent